Airbase-ng 1.2 rc2 - (C) 2008-2014 Thomas d'Otreppe Original work: Martin Beck http://www.aircrack-ng.org usage: airbase-ng <options> <replay interface> Options: -a bssid : set Access Point MAC address 设置接入点MAC地址 -i iface : capture packets from this interface 从指定接口捕获数据包 -w WEP key : use this WEP key to en-/decrypt packets 使用WEP密码破解或者加密数据包 -h MAC : source mac for MITM mode 中间人模式的源MAC地址 -f disallow : disallow specified client MACs (default: allow) 过滤指定MAC地址 -W 0|1 : [don't] set WEP flag in beacons 0|1 (default: auto) 设置WEP标志，默认自动 -q : quiet (do not print statistics) 静默模式不输出 -v : verbose (print more messages) 输出模式 -A : Ad-Hoc Mode (allows other clients to peer) -Y in|out|both : external packet processing -c channel : sets the channel the AP is running on 设置AP的运行信道 -X : hidden ESSID 隐藏ESSID -s : force shared key authentication (default: auto) -S : set shared key challenge length (default: 128) -L : Caffe-Latte WEP attack (use if driver can't send frags) -N : cfrag WEP attack (recommended) -x nbpps : number of packets per second (default: 100) 设置频率 -y : disables responses to broadcast probes 忽略相应广播帧 -0 : set all WPA,WEP,open tags. can't be used with -z & -Z 设置所有WPA，WEP -z type : sets WPA1 tags. 1=WEP40 2=TKIP 3=WRAP 4=CCMP 5=WEP104 设置WPA1标志1=WEP40 2=TKIP 3=WRAP 4=CCMP 5=WEP104 -Z type : same as -z, but for WPA2 和-z相同，只是设置WPA2的 -V type : fake EAPOL 1=MD5 2=SHA1 3=auto 伪造WAPOL1=MD5 2=SHA1 3=auto -F prefix : write all sent and received frames into pcap file 将发送和接收的帧写入PCAP文件 -P : respond to all probes, even when specifying ESSIDs 回应所有探测帧 -I interval : sets the beacon interval value in ms -C seconds : enables beaconing of probed ESSID values (requires -P) 设置时间，需要-P 结合使用 Filter options: 过滤选项 --bssid MAC : BSSID to filter/use 过滤BSSID --bssids file : read a list of BSSIDs out of that file 读取存储的BSSID文件 --client MAC : MAC of client to filter 过滤MAC地址 --clients file : read a list of MACs out of that file 读取MAC地址文件 --essid ESSID : specify a single ESSID (default: default) 指定单个ESSID --essids file : read a list of ESSIDs out of that file 读取存储的ESSID文件 --help : Displays this usage screen
转载于:https://www.cnblogs.com/nightnine/p/5427299.html
相关资源：DirectX修复工具V4.0增强版
