这是从网上down下来的一个串口通信类，发现close函数忘记了设置Opened属性为false 还有后面string转byte[]和byte[]转string的函数有错误，索性删掉了 修改后的串口通信类如下： 下一篇将把我的测试程序主程序部分全部代码贴出来 可以坚强勇敢的用来实现串口通信。 using System; using System.Runtime.InteropServices;
namespace BusApp { /// <summary> /// /// </summary> public class mycom { public mycom() { // // TODO: 在此处添加构造函数逻辑 // } public int PortNum; //1,2,3,4 public int BaudRate; //1200,2400,4800,9600 public byte ByteSize; //8 bits public byte Parity; // 0-4=no,odd,even,mark,space public byte StopBits; // 0,1,2 = 1, 1.5, 2 public int ReadTimeout; //10 //comm port win32 file handle private int hComm = -1; public bool Opened = false; //win32 api constants private const uint GENERIC_READ = 0x80000000; private const uint GENERIC_WRITE = 0x40000000; private const int OPEN_EXISTING = 3; private const int INVALID_HANDLE_VALUE = -1; [StructLayout(LayoutKind.Sequential)] private struct DCB { //taken from c struct in platform sdk public int DCBlength; // sizeof(DCB) public int BaudRate; // current baud rate public int fBinary; // binary mode, no EOF check public int fParity; // enable parity checking public int fOutxCtsFlow; // CTS output flow control public int fOutxDsrFlow; // DSR output flow control public int fDtrControl; // DTR flow control type public int fDsrSensitivity; // DSR sensitivity public int fTXContinueOnXoff; // XOFF continues Tx public int fOutX; // XON/XOFF out flow control public int fInX; // XON/XOFF in flow control public int fErrorChar; // enable error replacement public int fNull; // enable null stripping public int fRtsControl; // RTS flow control public int fAbortOnError; // abort on error public int fDummy2; // reserved public ushort wReserved; // not currently used public ushort XonLim; // transmit XON threshold public ushort XoffLim; // transmit XOFF threshold public byte ByteSize; // number of bits/byte, 4-8 public byte Parity; // 0-4=no,odd,even,mark,space public byte StopBits; // 0,1,2 = 1, 1.5, 2 public char XonChar; // Tx and Rx XON character public char XoffChar; // Tx and Rx XOFF character public char ErrorChar; // error replacement character public char EofChar; // end of input character public char EvtChar; // received event character public ushort wReserved1; // reserved; do not use }
[StructLayout(LayoutKind.Sequential)] private struct COMMTIMEOUTS { public int ReadIntervalTimeout; public int ReadTotalTimeoutMultiplier; public int ReadTotalTimeoutConstant; public int WriteTotalTimeoutMultiplier; public int WriteTotalTimeoutConstant; }
[StructLayout(LayoutKind.Sequential)] private struct OVERLAPPED { public int Internal; public int InternalHigh; public int Offset; public int OffsetHigh; public int hEvent; } [DllImport("kernel32.dll")] private static extern int CreateFile( string lpFileName, // file name uint dwDesiredAccess, // access mode int dwShareMode, // share mode int lpSecurityAttributes, // SD int dwCreationDisposition, // how to create int dwFlagsAndAttributes, // file attributes int hTemplateFile // handle to template file ); [DllImport("kernel32.dll")] private static extern bool GetCommState( int hFile, // handle to communications device ref DCB lpDCB // device-control block ); [DllImport("kernel32.dll")] private static extern bool BuildCommDCB( string lpDef, // device-control string ref DCB lpDCB // device-control block ); [DllImport("kernel32.dll")] private static extern bool SetCommState( int hFile, // handle to communications device ref DCB lpDCB // device-control block ); [DllImport("kernel32.dll")] private static extern bool GetCommTimeouts( int hFile, // handle to comm device ref COMMTIMEOUTS lpCommTimeouts // time-out values ); [DllImport("kernel32.dll")] private static extern bool SetCommTimeouts( int hFile, // handle to comm device ref COMMTIMEOUTS lpCommTimeouts // time-out values ); [DllImport("kernel32.dll")] private static extern bool ReadFile( int hFile, // handle to file byte[] lpBuffer, // data buffer int nNumberOfBytesToRead, // number of bytes to read ref int lpNumberOfBytesRead, // number of bytes read ref OVERLAPPED lpOverlapped // overlapped buffer ); [DllImport("kernel32.dll")] private static extern bool WriteFile( int hFile, // handle to file byte[] lpBuffer, // data buffer int nNumberOfBytesToWrite, // number of bytes to write ref int lpNumberOfBytesWritten, // number of bytes written ref OVERLAPPED lpOverlapped // overlapped buffer ); [DllImport("kernel32.dll")] private static extern bool CloseHandle( int hObject // handle to object ); public void Open() { DCB dcbCommPort = new DCB(); COMMTIMEOUTS ctoCommPort = new COMMTIMEOUTS(); // OPEN THE COMM PORT.
hComm = CreateFile("COM" + PortNum ,GENERIC_READ | GENERIC_WRITE,0, 0,OPEN_EXISTING,0,0); // IF THE PORT CANNOT BE OPENED, BAIL OUT. if(hComm == INVALID_HANDLE_VALUE) { throw(new ApplicationException("Comm Port Can Not Be Opened")); } // SET THE COMM TIMEOUTS. GetCommTimeouts(hComm,ref ctoCommPort); ctoCommPort.ReadTotalTimeoutConstant = ReadTimeout; ctoCommPort.ReadTotalTimeoutMultiplier = 0; ctoCommPort.WriteTotalTimeoutMultiplier = 0; ctoCommPort.WriteTotalTimeoutConstant = 0; SetCommTimeouts(hComm,ref ctoCommPort); // SET BAUD RATE, PARITY, WORD SIZE, AND STOP BITS. // THERE ARE OTHER WAYS OF DOING SETTING THESE BUT THIS IS THE EASIEST. // IF YOU WANT TO LATER ADD CODE FOR OTHER BAUD RATES, REMEMBER // THAT THE ARGUMENT FOR BuildCommDCB MUST BE A POINTER TO A STRING. // ALSO NOTE THAT BuildCommDCB() DEFAULTS TO NO HANDSHAKING. dcbCommPort.DCBlength = Marshal.SizeOf(dcbCommPort); GetCommState(hComm, ref dcbCommPort); dcbCommPort.BaudRate=BaudRate; dcbCommPort.Parity=Parity; dcbCommPort.ByteSize=ByteSize; dcbCommPort.StopBits=StopBits; SetCommState(hComm, ref dcbCommPort); Opened = true; } public void Close() { if (hComm!=INVALID_HANDLE_VALUE) { CloseHandle(hComm); Opened=false; } } public byte[] Read(int NumBytes) { byte[] BufBytes; byte[] OutBytes; BufBytes = new byte[NumBytes]; if (hComm!=INVALID_HANDLE_VALUE) { OVERLAPPED ovlCommPort = new OVERLAPPED(); int BytesRead=0; ReadFile(hComm,BufBytes,NumBytes,ref BytesRead,ref ovlCommPort); OutBytes = new byte[BytesRead]; Array.Copy(BufBytes,OutBytes,BytesRead); } else { throw(new ApplicationException("Comm Port Not Open")); } return OutBytes; } public int Write(byte[] WriteBytes) { int BytesWritten = 0; if (hComm!=INVALID_HANDLE_VALUE) { OVERLAPPED ovlCommPort = new OVERLAPPED(); WriteFile(hComm,WriteBytes,WriteBytes.Length,ref BytesWritten,ref ovlCommPort); } else { throw(new ApplicationException("Comm Port Not Open")); } return BytesWritten; } } }敬告各位网友： 该程序源码已经放到本blog第一篇 中提供下载！
转载于:https://www.cnblogs.com/tuyile006/archive/2006/09/25/514327.html
相关资源：C#结合串口通信类实现串口通信源代码.pdf